technician measuring internal dimensions of a rectangular tin box with calipers
Round tin box

The Procurement Manager’s Guide to Tin Box Dimensions: Avoid Costly Sizing Errors 

The Procurement Manager’s Guide to Tin Box Dimensions: Avoid Costly Sizing Errors 

By the Tinboxmate Team

Stop us if you’ve heard this one before: A brand orders 50,000 custom tins based on the “specs on the drawing.” The tins arrive. They look perfect. But when the fulfillment team tries to pack the product, it doesn’t fit.

The tin is too tight.The result? 50,000 units of scrap metal and a delayed product launch. 

At Tinboxmate, we see this happen too often. It’s not because the procurement manager can’t read a ruler. It’s because measuring metal is fundamentally different from measuring paper cartons. Paper stretches; steel doesn’t.

If you are sourcing metal packaging for food, cosmetics, or promotional gifts, getting the dimensions right is the single most effective way to cut costs. Why? Because if your measurements match one of our existing molds, you save thousands of dollars in tooling fees. 

Here is how we handle dimensions on the factory floor—and how you should too.

The Only Formula That Matters: LxWxH

In our industry, communication is everything. If you mix up the order of dimensions, you might end up with a tin that opens on the wrong side. 

Always stick to the global standard: Length x Width x Height (LxWxH).

But here is the trick: Orient the tin correctly before you measure.diagram showing length width height orientation for metal packaging

  • Place the tin on the table with the lid facing up.
  • Length: The longer side of the opening.
  • Width: The shorter side.
  • Height: The vertical distance from the table to the top edge. 

Pro Tip: Don’t confuse “Body Height” with “Total Height.” If you need the tin to fit into a shipping carton, you need the Total Height (which includes the lid). If you only give us the Body Height, the final product might be 3-5mm taller than you planned.

Internal vs. External: The Rookie Mistake

This is where 80% of sizing errors happen.

When you look at a cardboard box, the wall thickness is negligible. With tinplate, the material is thin (usually 0.23mm), but the construction takes up space.

To make a tin safe to handle, we roll the edges. This “curl” eats into the internal volume.

  • External Dimensions: Use these to calculate shipping costs and master carton sizes.
  • Internal Dimensions: Use these to determine if your product will actually fit.

If you have a soap bar that is 100mm long, and you order a tin with an external length of 100mm, your soap will not fit. The inward curl will block it.  Always specify Internal Dimensions when checking product fit.

The “Breathing Room” Rule

Metal is unforgiving. It has zero elasticity.

If your product diameter is exactly 75mm, and the tin’s internal diameter is 75mm, you create a vacuum seal. Your customer will struggle to pull the product out.

We recommend the 2mm Rule:

  • Length & Width: Allow 1mm to 2mm of total clearance (0.5mm – 1mm per side).
  • Height: Allow 2mm – 3mm clearance, especially if you plan to use an insert (like EVA foam or a plastic tray).

This gap ensures a premium user experience—the product slides out smoothly without rattling.

The Corner Radius (R) Trap

Rectangular tins are rarely sharp-edged. They have rounded corners, known as the Corner Radius (e.g., R3, R5).

If your product is a square block with sharp 90-degree corners, it might clash with the rounded corners of the tin, even if the length and width measurements suggest it should fit. 

Our advice: Send us a physical sample of your product. We can check it against our mold drawings to ensure the corner radius won’t be an issue.

Save $2,000+ by Using Existing Molds

Making a new mold for a custom size is expensive and takes time (usually 3-4 weeks). 

Before you commit to a brand-new size, ask us. At Tinboxmate, we have a library of molds built up over decades. If your required size is 150x100x50mm, and we have a mold that is 152x102x50mm, can you tweak your product layout slightly?

If yes, you just saved the tooling cost and cut your lead time by a month.

Verify Before You Buy 

We hate surprises as much as you do. We offer two ways to guarantee fit before mass production:

  1. 3D Plastic Mock-up: We print a plastic replica of the tin structure. It costs a fraction of a metal sample and lets you physically test the fit in days. 
  2. Product Testing: Ship your product to our facility. Our engineers will test it in various existing molds and send you a video of the fit.

Precision saves money. Let’s get your dimensions right the first time.Welcome to contact us.

Share article

Lets get started! Contact us for a free quote on your next home improvement project.